FREE Warp Coil Label Template: Label Those Springs!
When you have more than one loom and a bazillion sets of warp coils, it can be a pain to find a warp coil you want when you want it. Instead of struggling with this every time they warp, a lot of our smart customers label their warp coils so they always know which one is which. I’ve made a printable template to make labeling your own warp coils easier!
Step One: Determine what loom sizes and warp coils you have
You probably already know what size loom you have, but if you’ve forgotten, measure the top beam in inches. That number is your loom size.
To determine what size each warp coil is, place your coil on your loom and measure an inch. Count how many dents (spaces in the spring) there are in that inch. That number is the size warp coil you have. If you have more than one loom and you’ve mixed up your warp coils this can be a more difficult process. If you get a non-standard number, you may have a warp coil on the wrong loom!
Step Two: Pop by your local office supply store and grab some standard sticker address labels. I used an Avery template number 5160. This size is very standard, though, so it should be fine for other brands as long as they have 30 address labels.
This is the template I downloaded: Download the template here
Step Three: Download my template and edit it for your needs. You probably don’t have every loom and every coil, and may have a bottom spring kit so you have more than one of certain coils. Edit the template in Word and print it on your sticker labels!
Step Four: Cut each label in half and place each label on the end of the corresponding warp coil. I found folding a little end over the end of the warp coil and then folding everything in half worked best.
Step Five: Bask in your organizational skills.