Showing 1–12 of 24 results
Specially made for us in Sweden from the same texsolv used to make all non-metal heddles for floor looms, these one-eye Mirrix heddles come in a roll of 100. They are strong (they should last as long as you and your loom do), easy to use and are good at almost any sett on the loom because they are thin. For bead weaving past 18 dents per inch we recommend making your own thinner heddles. These are the only pre-made heddles you can buy that work on the Mirrix Loom if you choose not to make your own.
Note: Yes, they are reusable and very long-lasting!
Choose any loom size. Available in 8, 10, 12,14, 16, 18, 20 or 22 Dents Per Inch.
Available in 12, 14, 16, 18 or 20 Dents Per Inch.
Need a 6, 7, 8, 9 or 10 dent coil? Each of these can be used every-other-dent, so you can use the 20 DPI spring every other dent for 10 DPI.
The No Warp-Ends Kit eliminates the need to weave-in warp ends when bead weaving. It can only be used without the shedding device. It is perfect for using with any kind of warp material including wire. Set up with the No Warp-Ends Kit is very easy and once you have it in place, you can weave as many pieces as you want (as long as they are the same size) using the same set up. Read more here.
This kit allows you to put on a shorter warp. In so doing you will reduce warp waste. Because it also eliminates having a layer of warp on both the front and back of the loom, it allows you to better position your hand for weaving wider pieces with the traditional method of bead weaving. It is also great for those of you who weave tapestry from the back and want to have a better view of the front of your piece from the back of the loom.
The package includes an extra warping bar, Texsolv cord and special pegs to attach the Texsolv cord to the warping bars. You don't have to warp your Mirrix this way for weaving beads, but it's a nice alternative and adds yet another dimension to ways you can use the Mirrix loom to fit your special weaving needs.
3 yards of Texsolv cord for the 8" - 22" Looms 5 yards of Texsolv cord for the 28" - 38" Looms
An extra shedding device for your Mirrix Loom for those of you who didn't buy one originally (For an 8" or 12" loom) or for those who want a second shedding device for your larger loom. Adding a second shedding device to your Mirrix will allow you to use techniques in your tapestry weaving such as twill weave, basket weave and tabby weave. These fancy and fun techniques will take your tapestry weaving to the next level.
You will receive the shedding device, a set of clips (if you need them), a handle, and an Allen wrench.
The Mirrix loom extenders are ideal for people who want to weave belts, guitar straps and longer, thin pieces without having to purchase one of the large looms. Included are two lengths of threaded rod, a coupling device to attach it to the threaded rod side bars of the loom, and feet extenders to give your loom its original stability.
There are two sizes of loom extenders. One size is for the 12 and 16 inch looms and gives an additional two feet of weaving length. The other size is for the 22 inch loom and gives an additional 20 inches of weaving length (this is because more length would make the loom unstable).
Clip this add-on beam to the back of the bottom beam of your loom with the included C-Clamps and you increase the distance between the front and back warps by an inch and a half, providing a total of two and a half inches of space between the two layers of warp. This is perfect for those who weave wide bead pieces using the traditional method because you can easily get your hand behind the warp to hold the beads in place. It also works for tapestry weavers who want more space between the front and back warps.
*Note: The bottom beam does not increase the size of the shed, only the space between the two layers of warp.