Bottom Spring Kits
Bottom Spring Kit (warp coils not included)
For the 8" Loom: $15
For the 12" Loom: $20
For the 16" Loom: $20
For the 22" Loom: $25
For the 28" Loom: $25
For the 32" Loom: $25
For the 38" Loom: $25
The bottom spring kit is a plastic tray for holding a spring at the bottom of the loom (like the one at the two) with two attached brass acorn nuts for holding the spring (warp coil).
Intended primarily for bead weavers and small format tapestry weavers, the bottom spring kit allows you to attach a warp coil on the bottom of your loom. The warp coil on the bottom is useful for keeping the warps correctly aligned when putting on that first row of beads or for evenly spacing the warp for small format tapestry weaving. It is simply and easily attached with permanent 2-sided tape. Additional warp coils must be purchased separately.
Bottom Spring Kit with 8, 12, 14 and 18 dent warp coils
For the 8" Loom: $41.00
For the 12" Loom: $48.00
For the 16" Loom: $55.00
For the 22" Loom: $62.00
For the 28" Loom: $66.00
For the 32" Loom: $71.00
For the 38" Loom: $78.00
The bottom spring kit is a plastic tray for holding a spring at the bottom of the loom (like the one at the two) with two attached brass acorn nuts for holding the spring (warp coil).
Intended primarily for bead weavers and small format tapestry weavers, the bottom spring kit allows you to attach a warp coil on the bottom of your loom. The warp coil on the bottom is useful for keeping the warps correctly aligned when putting on that first row of beads or for evenly spacing the warp for small format tapestry weaving. It is simply and easily attached with permanent 2-sided tape.
Comes with 8, 12, 14 and 18 dent warp coils.
*Note: This is no longer available for the 8" Loom because the loom only comes with a 14 dent coil. You can order the bottom spring kit and 14 dent spring (or other springs) separately.
Bottom Spring Kit with two 20 and 22 dent warp coils
For the 8" Loom: $37
For the 12" Loom: $48
For the 16" Loom: $55
For the 22" Loom: $62
For the 28" Loom: $66
For the 32" Loom: $71
For the 38" Loom: $78
The bottom spring kit is a plastic tray for holding a spring at the bottom of the loom (like the one at the two) with two attached brass acorn nuts for holding the spring (warp coil).
Intended primarily for bead weavers and small format tapestry weavers, the bottom spring kit allows you to attach a warp coil on the bottom of your loom. The warp coil on the bottom is useful for keeping the warps correctly aligned when putting on that first row of beads or for evenly spacing the warp for small format tapestry weaving. It is simply and easily attached with permanent 2-sided tape.
Bottom spring kit with the following springs:
-Two 20 dent warp coils
-Two 22 dent warp coils
For small format tapestry weavers and bead weavers using size 15 beads and smaller, a bottom spring kit with springs just for you!
Bottom Spring Kit with two 16 dent warp coils
For the 8" Loom: $25
For the 12" Loom: $30
For the 16" Loom: $32
For the 22" Loom: $39
For the 28" Loom: $40
For the 32" Loom: $41
For the 38" Loom: $43
The bottom spring kit is a plastic tray for holding a spring at the bottom of the loom (like the one at the two) with two attached brass acorn nuts for holding the spring (warp coil).
Intended primarily for bead weavers and small format tapestry weavers, the bottom spring kit allows you to attach a warp coil on the bottom of your loom. The warp coil on the bottom is useful for keeping the warps correctly aligned when putting on that first row of beads or for evenly spacing the warp for small format tapestry weaving. It is simply and easily attached with permanent 2-sided tape.
Some who use Delicas for wide bead pieces prefer to use the 16 dent warp coil because they believe the 18 dent warp coil causes too much crowding. This set is for you... a bottom spring kit (perfect for wide bead pieces) and two 16 dent warp coils for the price of one.